KnBfXY CRACKiE-LACKiE – Michelle Nicole's ARTiSTiC ViVATiONS


Regular price $13.50

8oz Resealable Jar

CRACKiE-LACKiE is a thick medium that allows water based paints or plasters to create "chunky", chipped crackled effects. CRACKiE-LACKiE reproduces the sophisticated, aged, antiqued look of weathered paint and/or plaster. Recommended Use:

CRACKiE-LACKiE is formulated for application on cabinets, furniture, and walls. Ideal on previously painted or sealed surfaces. CRACKiE-LACKiE is NOT intended to crack latex or oil paint. CRACKiE-LACKiE is formulated to be used with water based flat paint, such as a Chalk Paint® Unicorn SPiT or other clay/mineral paints. Application:
Prepare the sealed base surface. The base surface or base coat is the layer that will be seen through the cracks of the topcoat layer of plaster or paint. If an undercoat or base coat of paint is desired, apply the paint and allow the paint to completely dry before applying the CRACKiE-LACKiE layer. CRACKiE-LACKiE can also be applied to stained or natural sealed wood surfaces. If working on a surface that will not be base coated with paint, make sure the surface has been previously sealed. If the surface is unsealed, seal the surface first with clear topcoat.
Brush or roll-on a liberal coat of CRACKiE-LACKiE to the prepared/base coated surface. Use light pressure when brushing or rolling CRACKiE-LACKiE to avoid over working the crackle medium as it begins to dry. CRACKiE-LACKiE will go on "milky" but will dry clear, allow the CRACKiE-LACKiE to dry thoroughly before proceeding.
Apply a topcoat of plaster, Unicorn SPiT or paint to the dry CRACKiE-LACKiE layer. The topcoat is the layer where cracks will appear once dried. For easy plaster applications, use the trowel to apply plaster topcoats for thick and heavy crackled finishes. For paint applications, use a brush or roller to apply the paint topcoat. Cracks will appear as soon as the topcoat of plaster or paint starts to dry. To eliminate early appearing cracks accidently being plastered or painted over, avoid excessive pressure and don't overwork the topcoat. Once top coat is dry seal with any clear coat following the recommended instructions.
• To achieve a natural irregular crackle finish: On a prepared surface apply CRACKiE-LACKiE using a round brush. Allow CRACKiE-LACKiE to dry until clear, then using light pressure, stipple the topcoat of paint. Allow surface to fully dry then seal.
• To create a linear crackle effect: Apply base coat of paint using linear strokes and allow to fully dry. Using a chip brush and light pressure apply CRACKiE-LACKiE to the painted surface using linear strokes. Once crackle medium is dry ( CRACKiE-LACKiE dries clear), apply a liberal coat of paint in linear strokes. Be sure to maintain light pressure. Allow the crackled surface to fully dry then seal.
• To create a "chipped" crackle finish: Apply a thick layer of CRACKiE-LACKiE using a round brush. Allow CRACKiE-LACKiE to dry until clear, then using light pressure stipple the topcoat of paint. As the paint begins to dry, remove strategic areas with a damp sponge. Rotate the sponge as needed to find clean areas on the sponge and quickly wash it out as needed. Allow surface to fully dry then seal.
• For added texture, CRACKiE-LACKiE can be used with STONiE-ERODiE Helpful Hints- Hints - What to do if cracks do not appear?
If cracks do not appear after the topcoat of paint is completely dry, one of the following reasons could be the cause of the missing crackle effect:
- The CRACKiE-LACKiE medium was overworked when being applied and therefore wiped back leaving not enough crackle medium on the surface.
- Not enough CRACKiE-LACKiE medium was applied between the base surface/base coat and the topcoat.
- Not enough paint for the paint topcoat layer was used and therefore there wasn't enough paint to crack.
- Topcoat layer was overworked and cracks were filled in by passing over cracks too many times.
If cracks do not appear after the first attempt reapply CRACKiE-LACKiE with a heavier hand or use 2 coats of CRACKiE-LACKiE if desired. Repeat the application of paint topcoat process based on desired finish. Clean up & Product Storage: Easy clean up with soap and water. Seal the container tightly. Do not let freeze or expose to direct sunlight/extreme heat. Do not apply product when air and surface temperatures are below 50°F (10°C).